The Poolstore Bowman Single Phase Heater should only be installed by competent trade staff with the appropriate qualifications to carry out the work and must be installed in accordance with all relevant statutory requirements governing the installation.

This equipment must be installed with an isolation switch in the fixed wiring as required by AS3000 and it is designed to operate with the main axis of the water chamber in a vertical position.

The direction of the flow is such that the incoming water supply will enter the body at the lower union joint and leave the body at the upper union joint.

Please note that the reduction of the union tail piece from 50mm nominal size to 40mm nominal size will have no adverse effect on the heaters operation and this option should be determined by the trade person undertaking its installation.